kb:macos_proxmox

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
kb:macos_proxmox [2025-02-16 01:59] – created jaeyoungkb:macos_proxmox [2025-03-07 08:04] (current) – jaeyoung
Line 5: Line 5:
 To pass through an RX 6600: To pass through an RX 6600:
   * Add PCI passthrough (must be raw device, not mapped)   * Add PCI passthrough (must be raw device, not mapped)
 +  * Disable "Above 4G decoding" and "Resizeable BAR" in host BIOS
   * Add "agdpmod=pikera" as a boot argument in OpenCore   * Add "agdpmod=pikera" as a boot argument in OpenCore
     * edit EFI/OC/config.plist in the EFI partition     * edit EFI/OC/config.plist in the EFI partition
     * Under NVRAM/Add/7C436110-...9F82/boot-args     * Under NVRAM/Add/7C436110-...9F82/boot-args
-  * USB passthrough devices must also be raw devices, not mapped or ports+  * USB passthrough devices must have USB 3 enabled 
 +  * Change SystemProductName to "MacPro7,1" to enable multi-display 
 +    * Use [[https://dortania.github.io/OpenCore-Post-Install/universal/iservices.html#using-macserial|macserial]] to generate serial number and board serial and update them in config.plist
  • kb/macos_proxmox.1739671165.txt.gz
  • Last modified: 2025-02-16 01:59
  • by jaeyoung