Show pageOld revisionsBacklinksExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Running MacOS in Proxmox ====== Follow the steps here: https://www.nicksherlock.com/2022/10/installing-macos-13-ventura-on-proxmox/ To pass through an RX 6600: * Add PCI passthrough (must be raw device, not mapped) * Disable "Above 4G decoding" and "Resizeable BAR" in host BIOS * Add "agdpmod=pikera" as a boot argument in OpenCore * edit EFI/OC/config.plist in the EFI partition * Under NVRAM/Add/7C436110-...9F82/boot-args * USB passthrough devices must have USB 3 enabled * Change SystemProductName to "MacPro7,1" to enable multi-display * Use [[https://dortania.github.io/OpenCore-Post-Install/universal/iservices.html#using-macserial|macserial]] to generate serial number and board serial and update them in config.plist kb/macos_proxmox.txt Last modified: 2025-03-07 08:04by jaeyoung